Introduction for Rotating Way of Diamond Grinding Wheel

Diamond dressing roller mainly has three kinds of rotating ways: the braking-type, the driving-type and the linked type. Among these three ways of rotating, the braking and linked types easily make their  processing surface rough or corrugated, and the operating condition set is also very difficult.

Therefore, customers mainly choose the driving type in the processing, so that we can consider the dressing mechanism and the grinding performance. The precision and setting parameters of grinding wheel workpieces dressed by diamond dressing roller are the best way to rotating in the using process.

Because the anode area is far less than the cathode area, the anode is easy to be passivation and easily covered by anode sludge when making the thickening and thickening of plating. Therefore, we should prepare a pair of spare anode, in order for timely replacement and cleaning. We also should use a thin stick to tamp diamonds in the cathode model, in order to make diamonds close contact with each point, and the diamonds in the inner cavity can have uniform distribution.

In addition, we also should stir the diamond with the thin stick in this process, in order to make the hydrogen gas bubble stranded inside discharged in a timely manner. When plating finishing roller thickening, we should use high current density as far as possible, to save the production time. About 1-2h before the end, we can make the current density bigger so that the plating surface will become rough, which can enhance the combination fastness of low cast metal and plating.