Factors Influencing Product Quality of Polishing Material Polishing Wheel

Polishing material polishing wheel is used widely in many areas, such as the washing machine brush roller in food processing industry, fruit waxing washing machine brush roller, and hair washing machine brush roller, etc.; All kinds of plank furniture polish bristle brush, sisal components and other appliances; Glass washing machine brush roller in the ceramics and glass, sponge roller and so on. What are factors that influence the quality of polishing material polishing wheel products?

When using polishing materials for polishing, the damage of nickel plating layer often happens, which once became the key factor that blocks the production progress and influences the product quality. According to the analysis on the scene, it is mainly caused by unskilled operators. Factors influencing the quality of polishing wheel products are the following aspects.

Firstly, operators fail to grasp the correct polishing skills, so in the process of polishing, if the interface between cotton wheel and the workpiece is reduced, the pressure for the surface of the workpiece will be greatly increased, which will make the plating vulnerable to damage. But we can solve the problem by reducing the pressure between polishing wheel and the workpiece.

Secondly, polishing wheel does not get improper maintenance. The polishing paste on the surface of polishing wheel has not been removed for a long time, which does not conform to the soft and elastic requirements. Therefore, the surface of polishing wheel needs to be cleaned up according to the normal requirements. That is to say, the old polishing paste should be polished away with the toothed plates, and operators should pay attention to keeping polishing wheel in a soft state.

Thirdly, operators fail to make correct choices about the types of polishing paste. The polishing of nickel layer needs white polishing paste, and green polishing paste made up of stearic acid, chromic oxide, fatty acids and other components, is only applicable to polishing chrome, stainless steel and hard alloy.

Fourthly, the diameter of polishing wheel is too large. Polishing wheel represents the peripheral speed, so the wear and tear for the nickel layer also cause and increase the damage of nickel plating layer.