Henan Shengchuang Super Hard Products Co., Ltd
Henan Shengchuang Super Hard Products Co., Ltd
[
Henan,
China (Mainland) ]
Metal bond diamond cutting disc for cutting semiconductor materials
Metal bond diamond cutting disc for cutting monocrystalline silicon
TSP diamond cutter,1.5x1.5x5, for oil drilling bits,USA market
5 blades pdc drill bit for oil drilling(julia#kosuperhard.com)
360 Round shape PCD Cutting Tool Blanks,PCD cutting blanks(julia@kosuperhard.com)
2.0mm synthetic monocrystalline diamond for singal crystal diamond tools
2.0mm synthetic monocrystalline diamond for diamond cutting tools and grinding wheels
Pcd & CBN grinding wheels, Pcd/CBN diamond tools, super abrasive tools
Vitrified Bond Diamond Grinding Wheels for PCD ,PCBN,Hard Alloy
ceramic grinding wheel for natural diamond polishing and grinding
Henan, China (Mainland)
KOSUPERHARD
PCD DRILL BIT
Oil & Gas Drilling
Pieces
20
USD 8.000 - 200.000
shenzhen,shanghai
according to your requirement
15000 / Week
T/T, Western Union, MoneyGram, Other
PDC cutter Inserts
KO-Diamond dome inserts are two layered engineered products designed for high impact and wear resistant applications such as encountered in percussive drilling for oil and gas. Two layed structures have also found applications in three cone rock bits. They are available in sizes for both types of bits.
Tolerances: D =±0.0005'' D =±0.013.MM COMMERCIAL D =±0.0003'' D =±0.008.MM PREMIUM D =±0.0002'' D =±0.005.MM PREMIUM L=±0.002'' L =±0.051.MM DOM HIGHT =±0.01'' DOM HIGHT =±0.254.MM NOTE: The Diameter, Length and the Carbide Chamfer Machined to Customer Specifications. |
|
The Diameter, Length and the Carbide Chamfer Machined to Customer Specifications. |
Tolerance:D /-.0003, L /-.002.Products can be finished ground to meet customer’s OD and length specifications.
Our 3/4 inch, and 7/8 inch dome inserts have found successful application in geographical locations ranging from West and East Texas, New Mexico, Oklahoma, Arkansas, WV and NEUS regions.
Inserts are evaluated for their metallurgical features by microscopic examination of the section.Following micrographs show 1) the working layer integrity 2) the bonding between the working layer and the transition layer and 3) the interface integrity between transition layer and the carbide substrate.As can be seen in the following micrographs, the layers are homogenous and well bonded.
Layer Thickness:
KO-Diamond Hammer bit inserts are characterized by highest thickness of first layer than found in any competitive product in the market place.Typical thickness for the first layer is in excess of .045 inch and transition layer of .030 inch.
Photograph shows half cut view of both 3/4 inch insert (left) and 7/8 inch insert (right).
Section of both 3/4 inch and 7/8 inch insert
QUALITY CONTROL AND IMPACT TESTING
Inserts are manufactured under strict guideline where all high pressure and high temperature components, raw materials for inserts are regulated.All batches of inserts are checked for the following:Dye penetration to check presence of cracksThermal stability testDrop Weight Test andImpact Fatigue where inserts are subjected to impact at a rate of 20 hits per minute using a 5 Ton machine.