Henan Shengchuang Super Hard Products Co., Ltd
Henan Shengchuang Super Hard Products Co., Ltd
[
Henan,
China (Mainland) ]
Metal bond diamond cutting disc for cutting semiconductor materials
Metal bond diamond cutting disc for cutting monocrystalline silicon
TSP diamond cutter,1.5x1.5x5, for oil drilling bits,USA market
5 blades pdc drill bit for oil drilling(julia#kosuperhard.com)
360 Round shape PCD Cutting Tool Blanks,PCD cutting blanks(julia@kosuperhard.com)
2.0mm synthetic monocrystalline diamond for singal crystal diamond tools
2.0mm synthetic monocrystalline diamond for diamond cutting tools and grinding wheels
Pcd & CBN grinding wheels, Pcd/CBN diamond tools, super abrasive tools
Vitrified Bond Diamond Grinding Wheels for PCD ,PCBN,Hard Alloy
ceramic grinding wheel for natural diamond polishing and grinding
Henan, China (Mainland)
KOSUPERHARD
Polycrystalline Diamond
Round
PCD Cutter Blank
Pieces
2
USD 15.000 - 150.000
shanghai,shenzhen,guangdong
according to your requirement
Yes
170000 / Month
T/T, Western Union, MoneyGram
360 degree Round shape PCD Cutting Tool Blanks,PCD cutting blanks(julia#kosuperhard.com)
PCD Cutting Tool Blanks
1.Longer tool life
2.Uniform surface finish
3.Reduced machine down time
4.High workpiece quality
360 Round shape PCD Cutting Tool Blanks,PCD cutting blanks
PCD cutting tool blanks are produced by sintering selected diamond particles at ultra-high pressure and high temperatureand consist of a diamond layer on a tungsten carbide substrate.
Features:
PCD blanks provide the hardness,abrasion and thermal conductivity of natural diamond,combided with the toughness of tungsten carbide. Work pieces processed by PCD have good surface finish and may not need to be finish ground.It is an ideal tool material for its long life and high efficiency.
Application:
PCD is widely used for the machining of non-ferrous metals and alloys,such as aluminum,copper,aluminum / gray iron composites,as well as nonmetallic materials such as wood,chipboard,ceramics,plastic,rubber etc,where high abrasion resistance and good surface finish are required.
Grain size:
The products are available in 5μm,10μm and 25μm .
Advantages:
Longer tool life
Uniform surface finish
Reduced machine down time
Highly improved workpiece quality and excellent dimensional control
Increase productivity
High material removal rate
Lower cost per piece
The tool life of a PCD cutting edge is usually 50 to 250 times greater than that obtained with conventional tungsten carbide cutting tools.
PCD cutting tool blanks application recommendation:
Grain size |
Application |
Advantages |
5μm |
Aluminum,Copper,Precious Metals,Wood Composites and Plastic |
Excellent surface finish |
10μm |
<</span>14% Si/ Al Alloys,copper Alloys,Graphite and Graphite Composites,Wood Composites,Green ceramics and carbides.
|
Excellent wear resistance and good surface finish. |
25μm |
>14% Si/ Al Alloys, Metal Matrix Composites, Bi-Metals (aluminum/ cast iron),Sintered Ceramics and Carbides,Other highly abrasives materials.
|
Long life and extremely high wear resistance. |
Any interest pls feel free to contact julia#kosuperhard.com or juliazhang1314#gmail.com