Quick Details

• Place of Origin: Beijing, China (Mainland)
• Brand Name: KSHS
• Model Number: 6A2T 2A2T
• Shape: Flat-Shaped
• Abrasive: Diamond
• Bonding Agent: Ceramic
• Hardness: as required
• Viscosity: as required
• Size: External diameter 300-1200mm
• Key word: lapping plate
• Surface finish/Roughness: Ra0.05-Ra0.2um
• Parallelism: ≤1.5um
• Flatness: 0.05um

Packaging & Delivery

Specifications

1.FSAT MATERIAL REMOVAL RATES 
2.FINER FINISHES 
3.BETTER FLATNESS CONTROL 
4.MORE CONSISTENT PROCESS CONTROL High-precision flat lapping and polishing principle and Technology Description: high precision flat lapping and polishing, using free granular abrasive, move relatively on the surface that the workpiece be machined and the disc-based surface, so that the workpiece surface becomes quite flatness and smoothness. They don’t need strong clip, vacuum or magnets to fix the workpiece but naturally be placed on the disc. They can be basically suited for processing of any metal and nonmetal materials, parts, without the mandatory rigid fixture and general grinding . They can also reduce the impact and heat generated by the secondary deformation. It’s more conductive to the processing of high precision and high-quality finish. Even if an inexperienced operator can also easily get the best 0.2um thick Ra 0.022 mm flatness and dryness degree.

Flatness :

the flatness of workpiece depends on the degree of disc formation. With the continuous deepening of the field of processing and increasingly demands on accuracy and efficiency,

Roughness:

the roughness of surface depends on the abrasive particle size, shape and disc material and hardness of the workpiece.

Coarse grinding:

the use of coarse-grained abrasive to grind on the surface of the disc and workpiece. It has a large quantity, high efficiency but coarse surface. It is suitable for the grinding work that has much leftovers.

The mill:

the use of moderate abrasive particles to grind in the disc and the workpiece surface. It achieves large quantity, high efficiency and the roughness of surface is moderate. It is suitable for the workpiece that is of general grinding capacity.

Grinding:

the use of finer- grained abrasive to grind on the surface of the workpiece and the millstone. It has a smaller amount of fee gear. The smooth finish is good and the cut marks are thin.

Soft-polished:

disc on the use of special materials to install a polishing pad or a polishing cloth . the polishing material move between the polishing pad or a polishing cloth. So that the workpiece has a higher mirror-like smooth finish than the hard-polishig.

Hard-polishing:

the use of a high precision basal plane(such as synthetic plates, copper wire, tin plate, resin plate) by adding micro-diamond abrasive to make the workpiece surface become not only a high-precision flatness, but has a mirror-like and high quality smooth finish.