AVIC Tianshui New & High Abrasives Co., Ltd
AVIC Tianshui New & High Abrasives Co., Ltd
[
Gansu,
China (Mainland) ]
Gansu, China (Mainland)
Lanhang
Combination
500/508mm (20'')
Straight
Snagging
30
Resin
Hard
Dense
Dry/Wet
Pieces
20
Tianjin/Qingdao/Shanghai
15-30 days
Wood Box
2000 / Month
L/C, T/T
1. Introduction
The grinding efficiency of Resin Heavy-Duty Grinding Wheel is among the top of the other kinds of abrasive products. It is mainly used in iron and steel industry for the grinding of steel ingot, billet, steel plates and all kinds of casting surface cleaning, etc. So, normally Snagging Wheel or Billet grinding wheel is called by us. Its development depends on the development of steel industry, and the corresponding development of high efficiency grinding machine. In the past way, both vitrified grinding wheel and resin bonded grinding wheel are used in the billet grinding operation. As the time goes on, resin bonded grinding wheel will be used instead of vitrified grinding wheel because of its high rotation and impact strength.
2. Advantage
1) we passed the certification of GB/T19001-2008/IS09001:2008
2) Products have the characteristic of high working speed, high grinding efficiency, low power consumption and low labor intensity.
3) All products will be supplied according to customers’ different requirements.
4) Raw materials imported from saint-gobain and German PFERD.
3. Production process
Mixing - Molding - Forging - Unloading - Curing
4. Specification
Max Operation Linear velocity: 80 M/S
Available Size: Φ500×65×203、Φ500×100×203、Φ610×75×203、Φ610×100×203, Φ760×100×127, etc.
Available Grit Size: all sizes
5. Application
It is mainly used in iron and steel industry for the grinding of steel ingot, billet, steel plates and all kinds of casting surface cleaning, etc.
6. Package
Products are packed in wooden box with pallet. 5 or 15 pieces in a wooden box with pallet. Also can be customized.
7. The Operation of Abrasive Products
Dos
1. Before start the machine,always ensure various protective devices of machine tools and reset switch of various actions are adjusted in position.
2. Using protective cover, always ensure that it covers at least half the diameter of the grinding wheel.
3. Before starting to use the new installation of grinding wheel which has been dressed, always ensure grinding wheel idles for one minute at operating speed with the guard of protective cover.
4. When grinding, always wear safety goggles or other similar safety supplies.
5. Dressing or using grinding wheel, always touch lightly.
6. When necessary, always dress grinding wheel.
7. Before grinding wheel stop running, always close cooling fluid to avoid grinding wheel unbalance.
DON’Ts:
1. Use grinding wheel at an speed which exceeds the highest limit speed.
2. Start machine tool without protective cover.
3. Stand directly in the face of machine tools after starting machine.
4. Force workpieces into grinding wheelwhich lead to grinding pressure and feed are excessive.
5. Force grinding which lead to machine motor slow down obviously or workpieces burning hot.
6. Put stationary grinding wheel in liquid.
7. Impose external forces on grinding wheel to make it stop running.
8. Continue to use grinding wheel without dress which surface has glazed.
9. Make grinding wheel used in other operations which are incompatible with their design.
10. Operator works without safety education and related certificates.
We sincerely wish to enter into long-lasting cooperation relationship with every new and old customer.