Zhuzhou Kuck Carbide Co.,ltd
Zhuzhou Kuck Carbide Co.,ltd
[
Hunan,
China (Mainland) ]
A Series Cylindrical without End Cut Carbide Rotary Burrs Files
B Series Cylindrical with End Cut Carbide Rotary Burrs Files
C Series Cylindrical with Radius End Carbide Rotary Burrs Files
F Series Tree Shape with Radius End Carbide Rotary Burrs Files
G Series Tree Shape with Point End Carbide Rotary Burrs Files
J Series 60 degree Angle Countersink Carbide Rotary Burrs Files
K Series 90 Degree Angle Countersink Carbide Rotary Burrs Files
Hunan, China (Mainland)
KUCKCarbide
L Series Cone with Radius
10
Single Cut, Double Cut
Pieces
10
USD 1.990 - 2.990
Shenzhen
5 days
As buyer requirement
Yes
10000 / Year
T/T, Western Union, MoneyGram
Tungsten Carbide burrs can be used on most hard materials: metals including steel, aluminum and cast iron, stone, ceramic, porcelain, hard wood, acrylics, fiber glass and reinforced plastics.
Carbide Rotary Burrs are used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material. For drilling holes or cutting a hole in metal then a carbide drill or acarbide end mill/slot drill or carbide router is required rather than a carbide burr.
[L series carbide burrs] Use cone shaped tungsten carbide burrs for making v-cuts and rear side chamfering.
Carbide burrs commonly come in two cuts, single cut and double cut:
Single Cut carbide burrs have a right handed (Up cut) spiral flute. These tend to be used with steel, copper, cast iron and ferrous metals and will remove material quickly with a smooth finish.
Features of Single Cut:
(1) Heavy removal of material;
(2) Milling;
(3) Deburring;
(4) Cleaning;
(5) Creates long chips.
Double Cut or cross cut carbide burrs tend to be used on non ferrous metals, aluminium, soft steel, plastics and hard wood. Double cut or cross cut (2 flutes cut across each other) will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the material.
Features of Double Cut:
(1) Medium- light removal of material;
(2) Deburring;
(3) Fine finishing;
(4) Cleaning;
(5) Smooth finish;
(6) Creates small chips.
SC----Single Cut
DC----Double Cut
A Series Cylindrical without End Cut Carbide Rotary Burrs Files
B Series Cylindrical with End Cut Carbide Rotary Burrs Files
C Series Cylindrical with Radius End Carbide Rotary Burrs Files
F Series Tree Shape with Radius End Carbide Rotary Burrs Files
G Series Tree Shape with Point End Carbide Rotary Burrs Files
J Series 60 degree Angle Countersink Carbide Rotary Burrs Files
K Series 90 Degree Angle Countersink Carbide Rotary Burrs Files