Pine Zone(Zhengzhou)Abrasives Industry Co.,ltd
Pine Zone(Zhengzhou)Abrasives Industry Co.,ltd
[
Henan,
China (Mainland) ]
Henan, China (Mainland)
Pine Zone
FDM7084
Automatic
New
Coated Abrasives
Pneumatic
15-18pcs/min
100mm,115mm,125mm,150mm,180mm
75mm,90mm,105-170mm
T27 & T29
General, double, long and short
Sets
1
Qingdao
Wooden Case
Yes
5 / Month
L/C, T/T
General Inforamtion | ||||||||
FDM7804 has been developed and improved as a stable proformace of 5 years while disc producing. | ||||||||
***It can make flap discs from 75mm to 180mm in diameter. | ||||||||
***The backing pads can be either reinforced fibreglass or steel or plastic. | ||||||||
*** Width of abrasive cloth roll can be changed from 20mm to 40mm depending on different size disc | ||||||||
*** Length and numbers of flaps can be changed from form 10" touch screen. | ||||||||
*** Cutting head is lower noise, more speed, more precision and less maintenance. | ||||||||
***The machine is equipped With DELTA PLC | ||||||||
*** Operation Panel is 10" colour touch screen. | ||||||||
***The Panel allows to set up various parameters of the machine. | ||||||||
*** Settting up the machine for a different size takes about 5-10 minutes. | ||||||||
*** Access to operation has been carefully equipped with safeguard, according to E.C and GB standard. | ||||||||
*** As regards emission of abrasive dust and to safeguard knives and their guides, the mahcine has | ||||||||
been equipped with various intake mouth, onf of which is placed directly in the cutting head. | ||||||||
*** The machine has been designed in the light of the idea that necessary condition for the best quality | ||||||||
of flap disc is to produce them with maniacal accuracy. | ||||||||
***The machine will be ready to star its normal operation schedule just half day after installation. | ||||||||
*** Worker can operate machine expertly after 3 days traning. | ||||||||
*** Worker will be given detailed instructions concerning each phase of the process, from preparing | ||||||||
of roll in abrasive cloth to the cure and how to change Glue. | ||||||||
*** Smart 250kg Glue pump will save your cost and time. | ||||||||
Dimensions: | 2900 x 19000 x2000(H)mm without glue pump | |||||||
Dimensions: | 41000 x 19000 x2000(H)mm with glue pump | |||||||
Weight: | 1360kg without glue pump | |||||||
Weight: | 1600kg with glue pump | |||||||
Electric Plant Characteristics: | ||||||||
Installed Power: | 4KW + 3KW ( Dust) | |||||||
Absorbed Power: | 3KW | |||||||
Voltage: | 380V( indicated on the electric board) | |||||||
Auxiliary Voltage: | 24V | |||||||
Frequency: | indicated on the electric board | |||||||
System: | Three phase + Earth +Neutral | |||||||
Degree of protection: | IP55 | |||||||
Operation: | Electromechanical | |||||||
Machine type: | Full automatic | |||||||
Pneumatic plant characteristics: | ||||||||
Maximum feed pressure: | 10 bar( 1.0 Mpa) | |||||||
Machine's operating pressure: | 4 bar(0.4 Mpa) | |||||||
Glue gun pressure: | 6 bar(0.6 Mpa) | |||||||
Glue pump pressure: | 5 bar(0.5 Mpa) | |||||||
Air consumption: | 100 litres/min | |||||||
Production Performances: | ||||||||
Disc Size: | Diameters: 75, 100, 115, 125, 150, 180mm | |||||||
Flap Size: | Width: 20-40mm | |||||||
Length: 15-28mm | ||||||||
Numbers: 35-150pcs | ||||||||
Rate of Speed: | 15-18 discs / min (D115mm single flap 72 flaps) | |||||||
18-23 discs / min (D115mm double flap 72 flaps) |