The machine tool use:

      The machine tool is a semi-automatic upright type honing machine , apply to the hole processing the various jar cover hole , hydraulic pressure jar, other precise through-hole and unfair hole, may gain Ra <0.1's surface harshness , dimension accuracy not being lower than grade-7 process the hole that the machine tool processes. Make use of the short route or distance of travel to be able to trim the taper processing the part hole's.

     The machine tool can process the hole diameter range for 50-200 millimeters. Maximal treating hole length is 1000 millimeters. Both being able to be a cast iron part and, can be steel part , the part including the heat treatment queen the part by honing.

Machine tool main technology specification:

1. Maximal honing hole diameter 
(mm): 200 
2. Minimal the top gem 
of a girdle-pendant hole grinds a
diameter (mm): 50 
3. Maximal chief axis route or 
distance of 
travel (mm): 1150 
4. Maximal honing hole 
depth (mm): 1000 
5. The table top working arrives at 
maximal hydrosphere basal plane 
distance (mm): 1120 
6. The column centre 
arrives at column face 
distance (mm): 370 
7. The chief 
axis revolves: Speed stepless is 
adjusted

8. Chief axis intercourse 
speed (stepless , m/min): 
3-30 
9. The chief axis makes 
a hole with an awl: NO.5 
10. Bistrique swells up 
shrinking: Hydraulic pressure
hydraulic 
11. Chief axis bottom-end  is at a distanceof till the table top working (mm): 2603
12. Table top dimension working (mm): 500 x1250 
13. Table top altitude working (mm): 450 
14. Maximal route or distance of travel of working table: 500
15. Betoken drive 
   A. Chief axis revolution electric 
   motor type: FRN7.5G11S-4CX 
   B. Chief axis 
   revolution electric motor power (KW): 7.5 
   C. Chief axis revolution stepless speed 
   regulating

16. Hydraulic pressure device 
   A. Hydraulic pump  type: YB-16/63x63 
   B. Hydraulic pump oil  transportation rate (divide  litre): 19/94   
   C. Drive the electric  motor type: Y160M-6-B3
   D. Drive electric  motor power (KW): 7.5
   E. Drive the electric motor rotation rate (rotate/ mark): 960 
   F. Betoken oil  road actuating pressure  (bar): 45 
   G. Assist oil  road actuating pressure (bar): 20
17. Cooling devise 
   A. Cooling pump  type: AB-50C 
   B. Cooling  pump electric motor power (KW): 0.12 
   C. Pumping  capacity cooling down  (L/min): 50
   D. Filter type: CFTQ-50 
   E. Filter electric motor  power (KW): 0.18 
   F. Cooler bin volume  (mm3): 700 x900x350
18. Machine tool external form dimension(L*W*H , mm): 1520*1950*4830 
19. Machine tool net weight/ gross weight (Kg): 4500/5300 
20. Machine tool package box dimension (L*W*H , mm): 5500*2000*1900